Guangzhou LoGen information technology Co., LTD.

Product Detail
Share to:
ABS 3D printer filament
品牌: LoGen3D

The ABS is a widely use synthetic resin material. As a 3D printing material, ABS 3D printer filament have excellent mechanical property, abrasion resistant, corrosion resistant, good weather resistance and also not easy to degrade. The ABS 3D printer filament has excellent comprehensive performance, high impact strength,chemical stability and great electrical performance.Therefore, The ABS can also be made into three special printing consumables: the ABS with conductive electrical,grow in dark ABS and luminous ABS.The ABS we provide can be made into luminous materials or glow in the dark and there are many kinds of luminous colors for you to choose from. The ABS 3D printer filament is widely used in machinery, automobile, electronic appliance, instrument, textile and construction industries etc.ABS 3D printer filament become a common 3D printing material with its extensive use,so it is also our hot selling product and can be made into variety of colors for you choose.

LoGen3D ABS 3D printer filament:
(1) Raw materials: imported from the best American material.
(2) Non harmful, non-toxic, and environment friendly
(3) Good toughness, high strength
(4) Low shrinkage, good round shape
(5) Accurate diameter (±0.02mm)
(6) No bubble
(7) Stable melting point
(8) No block the nozzle,print out smoothly
(9) Various colors can be choose or even customize color for you
(10) To be applied to a variety of 3D printer, Makerbot, UP plus, Mendel, Prusa, series, etc.

ABS 3D printer filament color:  

Natural,white,black,red,blue,orange,purple,green,yellow,grey,brown,silever,gold,pink,transparent,sky blue, dark blue ,florescent green,violet,skin,lime,dusk,kiwi,glow in dark (green),glow in dark(yellow),glow in dark(blue)etc.

1.Produce process

I . Before produce extruding filament ,we will dry the 3D pinrter filament for a enough time (3-5 hours).

II. Mix with colors masterbatch or colors powder, all which .certified with ROHS.

III.Adjust temperature and dragging rate , make filament diameter range at 1.6-1.8mm/2.8-3.0mm, roundness +/-0.05mm, each spool net weight 1kg+/-0.02kg

IV we put all filament spool in shelf, different kind in different shelf, all categories arranged orderly.

2.Productiong quality control

       I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.

      II.keep each record filament samples sent to customers, build a tracking able document.

      III.when the filament put on shelf longer than half a year, we will dry the filament again.

3.About waste & recycle

Much time you will find some black filament is too brittle, that added and mixed with some recycle and scrap after produced.

We haven’t produced with scrap outlet, rework&recycle material, or dispose, but for quality assurance purpose.


      We put each filament /spool on seal PE bag with desiccant , then smaller carton, then out big box

      We also have vacuum heated bag to replace of PE bag, make better avoid moisture.

5.research and developing

      we have engineers that specialty in color formulation ,plastic modification, packaging, quality control ,producing control, we can do according to your requirements .

      We have colors:

  Natural,white,black,red,blue,orange,purple,green,yellow,grey,brown,silever,gold,pink,transparent blue,transparent red,transparent yellow,transparent green,transparent orange,transparent,sky blue, dark blue ,florescent green,violet,skin,lime,dusk,kiwi,glow in dark (green),glow in dark(yellow),glow in dark(blue)etc

Guangzhou Logen information technology Co., LTD.

ADD:2 floor 3 building,11 Daalingshan road
           Tianhe district Guangzhou city,China
Tel:020-29839048  18925033957
Q Q:464642323



Login by:
My Profile
leave a message
back to the top